DEHYDRATINE 75 is a VOC compliant, water-based compound designed to dampproof concrete and masonry. The Dehydratine formulation is derived from colloidal, asphalt-based clay emulsions, that utilise a water carrier. It can be used above and below grade. DEHYDRATINE 75 is highly effective and is easily applied by trowel or spray. DEHYDRATINE 75 is an effective dampproofing product on roofing materials such as fibre glass fabric and metal. DEHYDRATINE 75 can be used over most metals to protect against rust and corrosion. It has good weathering and abrasion resistance. It resists flow or sag even when exposed to high ambient temperatures.
DURAL AQUA-DAM is a hydrophobic polyurethane compound that is injected in concrete and other sound substrates to stop water from entering into occupied or unwanted places. DURAL AQUA-DAM forms a water tight seal within the substrate, that remains even after the water has subsided.
EUCOFLEX PU 100 is a single component high build, thixotropic, emulsified modified with PU pre-polymers and synthetic rubber copolymer of the high performance Neoprene type. The fusion of PU pre-polymer and Neoprene rubber in modified emulsion imparts special properties to the product such as better elongation, recovery and cold flexibility.
EUCOPROOF SA is a self adhesive polymer modified bituminous, waterproofing sheet membrane laminated onto a tough HDPE film one side and silicone release film on the other. EUCOPROOF SA conforms to the requirements of BS 8102. EUCOPROOF SA is used as waterproofing or damp proofing membrane intended for concrete protection. It may be used for horizontal and vertical application for tanking below ground structures, subways and retaining walls.
EUCOPROOF 1200 PA is a HDPE unique composite membrane treated with pressure sensitive adhesive to enable good adhesion with concrete surfaces. EUCOPROOF 1200 PA form a unique integral protection around the concrete poured against it. EUCOPROOF 1200 PA seal to concrete prevents any ingress or migration of water around the structure.
EUCOPROOF 3000 TA is a plastomeric waterproofing membrane, manufactured from mixture of bitumen and selected APP (Atactic Poly Propylene) polymers blended together to obtain excellent heat & UV resistance and waterproofing properties. Upper surface finish is available in PE film or fine sanded finish. EUCOPROOF 3000 TA can be used as a waterproofing membrane on; flat or pitched roof, foundations and basements, terraces, balconies, patios, bridge and cut and cover tunnels, as well as concrete foundations and footings.
EUCOPROOF 4000 TA is a plastomeric waterproofing membrane, manufactured from mixture of bitumen and selected APP (Atactic Poly Propylene) polymers blended together to obtain excellent heat & UV resistance and waterproofing properties. Upper surface finish is available in PE film or fine sanded finish. EUCOPROOF 4000 TA can be used as a waterproofing membrane on; flat or pitched roof, foundations and basements, terraces, balconies, patios, bridge and cut and cover tunnels, as well as concrete foundations and footings.
SPEED PLUG is a rapid-setting hydraulic cement compound used to instantly stop running water or seepage in masonry or concrete. SPEED PLUG is ready to use and requires only the addition of water before plugging and sealing active leaks.
TAMMSCOAT WP is an elastic covering of creamy consistency, using styrene-acrylic copolymers in watery emulsion which, once dry, forms a flexible, waterproofing and durable film. TAMMSCOAT WP is a single component ‘ready to use’ formulation with quick drying properties at room temperature.
TAMOSEAL FLEX is a two part and polymer modified and flexible cementitious waterproofing coating. It is applied to concrete and mortar to prevent water infiltration in severe conditions. It is also enhances the ability of substrates to resist sulphate attack and limits carbon dioxide penetration.
TAMOSEAL M is a two part and polymer modified cementitious waterproofing slurry to waterproof concrete and masonry. It comprises of a liquid polymer and a cement base mix incorporating with special additives. TAMOSEAL M is applied in areas such as swimming pools, fountains, basements, retaining walls, bathroom floors and terraces/balconies.
EUCOFLEX PU 300 is an elastomeric liquid applied hybrid PU Acrylic based waterproof coating formulated to give long-lasting, maintenance free and superior waterproofing protection for concrete substrates.
INTEGRAL WATERPELLER M is a hydrophobic, pore-blocking admixture for concrete. It significantly reduces the water absorption of concrete. The incorporation of INTEGRAL WATERPELLER M in the concrete mix ensures its beneficial effects are distributed throughout the matrix, thus enhancing durability.